Sealing solution (without the need for degradation)
You can without degradation and with the lowest cost solution seal in order to seal the bathrooms, roofs, balconies, etc. which cause the decay insulating substrate or run incorrect insulation causes the moisture in the product Use.
Some of the specifications of the sealing solution are:
- محلول آب بند ( بدون نیاز به تخریب )
- مقاومت بالا در برابر مواد شوینده و اسیدی
- نفوذ پذیری بالا به سطح
- محلول باید به دور از نور مستقیم خورشید و در دمای مناسب ( 5 الی 25 سانتی گراد ) قرار گیرد.
In all of the above water absorption main cause of the destruction that can be achieved by using nano-coatings Nykapak (as one of the covers of major building) water absorption materials to zero up to a beautiful view of the building in order to maintain stability and cleanliness Be protected. This product is used to waterproof the desired stone.
The image below is the lower part of Milad Tower, which is protected by Nano Nikapak Nano Sealing Solution.
How to use the sealing solution
First, thoroughly clean and dry the surface and combine each liter of this product with an appropriate amount of cement and stone powder to create a slurry.
Then soak the surface with the mentioned solution and finally wipe the effect from the ceramic tiles with a cotton sack or napkin.
The amount of coating of this product is directly related to the dimensions of ceramic tiles and bricks و and the thickness of the binding can have a great effect on the consumption of this product.
tip: It is better to make some dough in the corners and parts where the fastening is destroyed and fill the desired parts.
Attention: The drying time of the nano-sealing solution is 21 hours after use.
There are no reviews yet.