Brick dandruff solution

125,000 تومان

The above amount is for each liter.

Brick dandruff, or white brick, is a white powdery substance that appears mostly on brick buildings.
Dandruff always causes problems on the surface of the facade and the approximate loss of appearance.

Use this nano product to protect the bricks from dandruff forever.

SKU: 400904 Category: Tags: ,

Description

Brick anti-dandruff solution

Most of the brick facades of the building are affected by dandruff. Dandruff is a crystalline salt deposit that appears on a brick facade and makes the building look ugly and dirty; But nanotechnology has done a great job with products like “desalination solution.” This product restores beauty and health to the brick appearance by eliminating dandruff. To better understand the desalination process of this solution, follow another article from Nanonikapak blog.

What is brick facade dandruff?

Salt is the main substance that causes dandruff in a brick facade. Salt is found in building materials such as brick, mortar, cement, lime, sand and clay. Common salts include calcium sulfate, sodium sulfate, potassium sulfate, vanadium sulfate, calcium carbonate, sodium carbonate, potassium carbonate, and manganese oxide, which leave a white or yellowish appearance on the facade.

Water is the second substance that makes up dandruff. During the execution of the brick facade, the water used in the mixture of cement and mortar with salt reacts chemically, which increases with rain and snow and provides the basis for dandruff and whiteness. Then, as the water evaporates, the salts remain on the surface of the brick, which in general terms, dandruff occurs.

The following table identifies the cause of dandruff, its chemical formula, and its salt source:

Dandruff-causing salts Chemical formula of salt Salt source
Calcium sulfate CaSO4+2H2O Brick
Sodium sulfate Na2SO4+10H2O Reaction of bricks and cement
Potassium sulfate K2SO4 Reaction of bricks and cement
Calcium carbonate CaCO3 Mortar
Sodium carbonate Na2CO3 Mortar
Potassium carbonate K2CO3 Mortar
Sodium Chloride NaCl Salty water
Potassium chloride KCl Wash the bricks with acid
Vanadium sulfate VoSO4 Brick
Vanadium chloride VoCl2 Wash the bricks with acid
Manganese oxide Mn3O4 Brick
iron oxide Fe2O3 Rusty iron
Calcium hydroxide Ca(OH)2 Cement

What is a brick anti-dandruff solution?

Nano-based desalination solution is produced. Nano-coatings are very thin layers or chemical structures that are used in various ways to improve the appearance and physical properties of building materials such as bricks.

Technically, a desalination solution is a nanoscale coating that is no more than 1 to 100 nanometers thick. Nanocoatings can be made to the thickness of a molecule or have multiple molecular layers.

Because the solution is nanoscale, it easily penetrates the pores of the brick and protects it from dandruff. The solution remains on the surface of the brick facade for many years and prevents the apparent destructive effects and physical damage of the brick.

In general, the characteristics of desalination fluid are:

    • The solution has a dark liquid.
    • The density of the solution is equal to 8.5 kg / m3.
    • The pH of the solution is 1 to 2.
    • High resistance to acids and chemical detergents.
    • Helps eliminate sulfate, carbonate, nitrate and chlorine dandruff.
    • It has high permeability (cleaning dandruff in deep brick pores).
    • It has the ability to seal and does not need to destroy the facade.
    • The solution price is economical in relation to the costs related to the continuous maintenance of the facade.
    • It does not damage the final surface of the facade, it even prevents damage.
    • The optimum storage temperature of the solution is between 5 and 25 ° C.
    • This product is sold in 1, 5 and 20 liters.

Purpose of using desalination solution

Liquid desalination solution that is applied to the brick facade of the building to protect the facade from dandruff and whitewash. As mentioned above, salts are not only present in the structure of bricks but also in the mortar used to make the facade. These salts react with water and appear as dandruff.

All buildings with brick facades (old and new) have the problem of dandruff. Solving the problem of Sefidak is very important, especially in the restoration of historical monuments in order to preserve the cultural values of the building. Even modern buildings that use brick as a symbolic material in their facade design, no dandruff is considered to mean maintaining the beauty of the building.

The purpose of using a dandruff product in the first place is to eliminate the unpleasant appearance of a brick facade. The second purpose is to use this liquid to protect the brick from structural damage. This means that the brick does not crack, break or fail and maintains its bond with the mortar.

Importance of using desalination solution in building facade

Typically, desalination solutions are used to transfer chemical and physical performance to the surface of a brick facade. For example, desalination fluid may have hydrophobic and oleophobic properties in addition to high cleaning power to improve damage resistance. This will mean an increase in the lifespan of the brick facade.

The desalination solution emits a much lower level of volatile organic compounds (VOCs) than other dandruff removers, which has increased the demand for this product. Being environmentally friendly and crediting sustainable development in the construction industry is an issue that has doubled the popularity of using this product.

Because nano-coatings are so thin, they are not visible to the naked eye. This is a big advantage for a brick facade in which aesthetics play a key role. This means that no trace of liquid remains on the brick and users can easily apply this solution on the facade of the structure.

How to use desalination solution

If there are any traces of dirt on the bricks that do not look like whiteness and dandruff, the facade should be cleaned and washed first. After the facade dries and the dandruff is completely visible, it is time to apply the dandruff liquid using a brush or spray the solution on the whole facade.

After one day, the facade of the building should be washed again. Then you can use a nano waterproof coating of bricks with hydrophobic materials on the bricks to insulate the facade surface against moisture and protect it from dirt and dandruff forever. The combined use of desalination solution and nano waterproof brick coating makes the facade a clean and healthy life.

Price of desalination solution

The use of desalination fluid has many benefits, one of the main advantages of this product is its reasonable price. Compared to the annual or seasonal cleaning costs of brick facades and the costs related to the structural failure of bricks (cracks and fractures), the price of the dandruff product will be very economical.

Most importantly, the concern of dirty facades for residential, office and commercial buildings is forever out of the minds of residents and their managers. Especially for important buildings, clean facade is a way to attract customers and sell the property properly; Certainly no one likes to live or work in a building with a dirty facade.

Once you use this solution and then apply the nano protective coating of the brick facade, it will not be necessary to clean and solve the problems of this type of building facade for many years. This product is a long-term guarantee to solve the main problems of construction in our dear country today.

Last Word

Dandruff liquid is the only effective and lasting way to get rid of dandruff and brick facade. This product can be used for different types of facade bricks (engineering bricks, refractory bricks, Kazakh bricks, avalanche bricks, concrete bricks, etc.); But many of the country’s brands have sold desalination solution. Therefore, it is important to buy from a reputable brand and store.

So if you want the facade of your building to be clean at any time of the year and enjoy seeing it to the fullest, make buying a desalination solution one of your top priorities. For this purpose, you can consult Nanonikapakcompany to provide the best nano coatings in the country and buy the product you want.

5/5 (1 Review)

Additional information

Weight 22 kg
Dimensions 30 × 30 × 26 cm
حجم (لیتر)

1 liter, 5 liters, 20 liters

Reviews

There are no reviews yet.

Be the first to review “Brick dandruff solution”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Be the first to review “Brick dandruff solution”

Your email address will not be published. Required fields are marked *